Set The Key Tone; Set The Battery Tone; Set The Docking Tone; Set The Sound Profile - Philips M888 Extended User Documentation

2
Press / to select
to confirm.
3
Select [Silent mode], then press [OK] to
confirm.
4
Select [Exception], then you can select
from these two options:
Select [On] to activate, or [Off] to
•
deactivate the silent mode, then press
[OK] to confirm.
• Select [Ring delay], then select an
option.
5
Press [OK] to confirm.
» The setting is saved.
Note
•
If [Exception] is set to [On] and [Ring delay] option
is selected, the handset rings only after length of ring
delay selected is reached.
•
Make sure that the contact under the [Set exception]
option of the phonebook menu is set to [On] before
you can exclude this contact from the silent mode.

Set the key tone

Key tone is the sound made when you press a
key on the handset.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Key tone], then press [OK] to
confirm.
4
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.

Set the battery tone

Battery tone is the sound made when the
battery is low and needs recharging.
1
Select [Menu].
, then press [OK]
, then press [OK]
2
Press / to select
to confirm.
3
Select [Battery tone], then press [OK] to
confirm.
4
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.

Set the docking tone

Docking tone is the sound made when you
place the handset on the base station or
charger.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [Docking tone], then press [OK] to
confirm.
4
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.

Set the sound profile

You can set the sound in the earpiece or
handsfree mode among 3 different profiles.
1
Select [Menu].
2
Press / to select
to confirm.
3
Select [MySound], then press [OK] to
confirm.
4
Select a profile, then press [OK] to
confirm.
» The setting is saved.
Access the sound profile during a call
Press [Sound] for once or several times to
change the sound profile during a call.
, then press [OK]
, then press [OK]
, then press [OK]
EN
31