Samsung 890V Installation Manual page 19

Pairing the Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via Bluetooth. Pair
Samsung Smart Control to the TV.
− Samsung Smart Control can only be paired to a single TV.
1 Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn the TV on.
− Remote control receiver's location may vary depending on the model.
2. The Bluetooth icon will appear on the screen as shown below. The TV will then attempt to connect to the Samsung Smart
Control unit automatically.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may be due to insufficient
battery power.
If the problem persists, the Samsung Smart Control restore pairing with the TV.
1. Press RETURN button and
− You have to control Samsung Smart Control apart from TV within 30cm ~ 40cm. But, you must place Samsung
Smart Control toward to TV's remote control receiver.
2. Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to TV automatically.
<Connection attempt and completion icons>
GUIDE button simultaneously for 3 seconds.
19
English