Switching The Appliance On - Siemens KS36VBI30/07 User Manual

en
Controls
Fig. "
1
Temperature display refrigerator
compartment
The numbers correspond to the
set refrigerator compartment
temperatures in °C.
2
"Super" button refrigerator
compartment
Switches super cooling on and
off.
3
Button "lock" function
If this function is switched on, no
settings are possible via
the controls.
4
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
5
Temperature selection buttons
refrigerator compartment
These buttons set
the temperature in the refrigerator
compartment.
6
Energy saving mode display
It is lit when the appliance is not
in use.
26
Switching
the appliance on
Switch on the appliance with the On/Off
button, Fig. !/7.
The temperature display, Fig. "/1,
indicates the selected temperature.
The appliance starts to cool, the light is
switched on when the door is open.
After the appliance has been switched
on, it may take several hours until the set
temperature has been reached. Do not
put any food in the appliance
beforehand.
Operating tips
While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
If the air humidity is high,
■
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.