Philips 55PUS6523 User Manual
Philips 55PUS6523 User Manual

Philips 55PUS6523 User Manual

Hide thumbs Also See for 55PUS6523:
Table of Contents

Advertisement

Quick Links

Register your product and get support at
6523 series
www.philips.com/TVsupport
User Manual
50PUS6523
55PUS6523

Advertisement

Table of Contents
loading

Summary of Contents for Philips 55PUS6523

  • Page 1 Register your product and get support at 6523 series www.philips.com/TVsupport User Manual 50PUS6523 55PUS6523...
  • Page 2: Table Of Contents

    Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 TV on Demand / Video on Demand 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Netflix 2 Software...
  • Page 3: Get Support

    On-line Help and User Get Support Manual To solve any Philips TV related problem, you can Identify and Register your TV consult our online support. You can select your language and enter your product model number. Identify your TV - TV model number and serial Go to www.philips.com/TVsupport.
  • Page 4: Software

    back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press  twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
  • Page 5: Quick Guide

    Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote  Standby / On control, the batteries might be empty. To switch the TV on or back to Standby. To replace the batteries, open the battery 2 - Playback and Record compartment on the back of the remote control.
  • Page 6: Ir Sensor

    To open the Smart TV start page. Text/Teletext. To start the next or previous chapter on a disc.     Colour keys Direct selection of options. Blue key , opens Help. 6 -  Mute To mute the sound or to restore it. 4 - ...
  • Page 7 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically.
  • Page 8: Setting Up

    Quick Start Guide that came with the TV. Connect Power Cable In case you lost this guide, you can download it from www.philips.com/TVsupport. • Insert the power cable into the POWER connector Use the model number of the TV to look for on the back of the TV.
  • Page 9 Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
  • Page 10: Connections

    Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
  • Page 11: Audio Device

    Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection.
  • Page 12: Mobile Device

    With the application you use to start Miracast, you can disconnect and stop watching the screen of the Mobile Device device on TV. The TV will switch back to the last selected programme. Wi-Fi Direct / Miracast From the TV To stop watching the screen of the device on TV, you About Wi-Fi Miracast can .
  • Page 13: Other Device

    When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and The Philips TV Remote App is available for iOS and subscription fees are paid (subscription methods can Android and is free of charge.
  • Page 14 To set the PIN code for the CAM… a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on 1. Press  SOURCES . your TV before you install the USB Hard Drive. 2.
  • Page 15 USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV.
  • Page 16: Switch Source

    Switch Source Source List • To open the sources menu, press  SOURCES . • To switch to a connected device, select the device with the arrows  (Right) or  (Left) and press OK. • To close the source menu without switching to a device, press ...
  • Page 17: Channels

    for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
  • Page 18 frequency value to search for channels, the All channels list but also in the New channels list. select Advanced. Empty channels are removed. If new channels are found or if channels are updated Frequency step size or removed, a message is shown at TV start up. The The TV searches for channels in steps of 8MHz.
  • Page 19 • Fine tune automatically. To fine tune a channel, select Fine tune and • Up to 4 Satellites - You can install up to 4 satellites press OK. You can fine tune the channel (4 LNBs) on this TV. Select the exact number of with ...
  • Page 20 Channels > Satellite installlation > Search for Manual Installation satellite > Remove satellite  (Home) > Settings > Install You can remove one or more satellites from your Channels > Satellite installlation > Manual current satellite installation. You remove the satellite installtion and its channels.
  • Page 21 With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
  • Page 22: Channel List

    1 - Tune to the channel of which you want to block Subtitles Language the HbbTV pages. 2 - Press  OPTIONS and select HbbTV on this If none of the preferred subtitle languages are channel and press  (right). available, you can select another subtitle language if 3 - Select Off and press OK.
  • Page 23: Favourite Channels

    Channel List Options Select Channel List  LIST >  OPTIONS > Select channel list Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. • Press , to switch to TV. •...
  • Page 24: Text / Teletext

    channels. Along with your favourite channels, the first About Favourite Channels 3 most used channels from the broadcasters’ default list will be appended after your favourite channels for You can create a favourite channel list that only holds your preview. You need to add these channels into the channels you want to watch.
  • Page 25 press  OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV. In that case, the set-top box’s teletext can be used instead.
  • Page 26: Tv Guide

    Change Day TV Guide If the TV guide information comes from the broadcaster, you can press  + to view the schedule of one of the next days. Press  - to go back to the previous day. What You Need Alternatively, you can press ...
  • Page 27: Freeview Play

    5 - Select a programme and press OK to start Set a Recording watching. 6 - Press  BACK to close. You can set a recording in the TV Guide. * Freeview Play is only for UK models. In the TV Guide, a programme set to be recorded is marked with ...
  • Page 28: Recording And Pause Tv

    Schedule a Recording Recording and You can schedule a recording of an upcoming programme for today or a few days from today Pause TV (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme…...
  • Page 29: Pause Tv

    press OK. to start viewing the paused broadcast. Press these 5 - Select the tuner from where you want to record keys repeatedly to change speed. and press OK. To switch back to the actual TV broadcast, 6 - Select the channel to record from and press OK. press ...
  • Page 30: Videos, Photos And Music

    Photo Options Videos, Photos and With a photo on screen, press  OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
  • Page 31: Music

    Video Options During the video playback, press  OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Charater set Select one of system for charater. Audio language Play the audio language if available. Status Display file information, like sound mode.
  • Page 32: Open Tv Setting Menus

    ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •...
  • Page 33 Restore a style Expert mode picture settings To restore the style to its original setting, go Colour Settings to  (Home) > Settings > All settings > Picture > Picture style, then  (Home) > Settings > All press  Restore style.
  • Page 34 Set HDR Plus to Off, Minimum, Medium, Maximum Picture Clean to set the level at which the TV automatically shows superior contrast and brightness effect for HDR Noise reduction content.  (Home) > Settings > All Note: Available when HDR (High-Dynamic Range) settings >...
  • Page 35 settings > Sound > Sound style Picture Format The available sound styles are ...  (Home) > Settings > All • Original - Most neutral sound setting settings > Picture > Picture format • Movie - Ideal for watching movies If the picture is not filling the whole screen, if black •...
  • Page 36 stereo content to your audio playback devices. Advanced sound settings • Multichannel: Select to only output 5.1 audio content (compressed multichannel sound signal) to your Volume Control audio playback devices. • Dolby Digital Plus: Select to output Dolby Digital Auto volume Plus or DTS content to your audio playback devices ...
  • Page 37 information for the channels that are installed on the General Settings TV. The TV cannot collect the TV Guide information from channels viewed from a digital receiver or Connection Related Settings decoder. • The TV comes with the information set to From the Format USB Hard Drive broadcaster.
  • Page 38 control > On Set screen off to save energy consumption Note:  (Home) > Settings > All settings > General settings > Eco settings > Screen off - EasyLink might not work with devices from other brands. Select Screen off, the TV screen is switched off, to switch the TV screen back on, press any key on the - The HDMI CEC functionality has different names on remote control.
  • Page 39  (Home) > Settings > All settings > General  (Home) > Settings > All settings > Region and settings > Shop setup > Logos and banner language > Language > Primary subtitle, Secondary subtitle Set to display Feature logos and Promotional banner. Digital channels can offer several subtitle languages for a programme.
  • Page 40 language > Clock > Time zone • Set Audio effect to On for extra audio effects in the commentary audio, like stereo or fading sound. Select one of the time zones. • Select Speech to set speech preference, Descriptive or Subtitles. Set the TV to switch to Standby automatically after a preset time Lock Settings...
  • Page 41: Network

    > Network > Connect to network > WPS Home Network If your router has WPS, you can directly connect to To enjoy the full capabilities of your Philips Smart TV, the router without scanning for networks. If you have your TV must be connected to the Internet.
  • Page 42: Network Settings

    You can switch this TV on from your smartphone or  (Home) > Settings > All tablet if the TV is in Standby. The setting Switch On settings > Network > Clear Internet Memory with Wi-Fi (WoWLAN) must be switched on. With Clear Internet Memory you clear your Philips...
  • Page 43 Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
  • Page 44: Smart Tv

    App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 13.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select  and press OK to start searching.
  • Page 45: Tv On Demand / Video On Demand

    TV on Demand / Video on Demand TV on Demand  (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand  (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
  • Page 46: Netflix

    Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press  to open the Netflix App. You can open Netflix immediately from a TV in standby.
  • Page 47: Environmental

    1 year. You can also find the power consumption values for this product on the Philips website for your country When this crossed-out wheeled bin symbol is www.philips.com/TVsupport attached to a product it means that the product is covered by the European Directive 2012/19/EU.
  • Page 48: Specifications

    Video support timing also includes field/frame rate Product specifications are subject to change without 23.976Hz, 29.97Hz and 59.94Hz. notice. For more specification details of this product, www.philips.com/TVsupport Power HDMI • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C •...
  • Page 49: Supported Input Resolution - Computer

    • 1080i - 50Hz, 60Hz Wi-Fi Certified • 1080p - 50Hz, 60Hz This TV supports Miracast certified devices. Performance may vary, depending on the capabilities 17.5 of the mobile device and the software used. Supported Input Resolution - Computer 17.8 Connectivity •...
  • Page 50: Troubleshooting

    Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
  • Page 51: Satellite

    Press  Settings > Help > Check the TV. settings at the start of the installation. You can set the If the video clip stays black, call Philips. Wait until the TV to search for One, Two or 3/4 satellites.
  • Page 52: Sound

    Call the telephone number for your country.  (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change Picture does not fit the screen / Wrong or unstable back to current source.
  • Page 53: Usb

    • If the Internet connection is OK, but cannot connect manual, press the colour key  Keywords and to Philips Smart TV server, you can perform “Clear look up HDMI Ultra HD. Internet Memory” via  (Home) > Settings > All • If there are intermittent sound disruptions, make settings >...
  • Page 54: Safety And Care

    The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
  • Page 55: Screen Care

    Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
  • Page 56: Terms Of Use

    TP Vision is the warrantor in relation to the apparatus, in general have the ability to emit and TV with which this booklet was packaged. Philips and receive electromagnetic signals. One of TP Vision’s the Philips Shield Emblem are registered trademarks leading business principles is to take all necessary of Koninklijke Philips N.V.
  • Page 57: Copyrights

    Copyrights 21.1 21.5 MHL, Mobile High-Definition Link and the MHL Logo Wi-Fi Alliance are trademarks or registered trademarks of the MHL, LLC. Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 21.2 HDMI 21.6 The terms HDMI and HDMI High-Definition Other Trademarks Multimedia Interface, and the HDMI Logo are...
  • Page 58: Open Source

    P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 22.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
  • Page 59 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
  • Page 60 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
  • Page 61 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
  • Page 62: Disclaimer Regarding Services And/Or Software Offered By Third Parties

    Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
  • Page 63: Index

    On-line User Manual 3 Dynamic Contrast 34 Dynamic surround 35 Parental Rating 40 Pause TV 29 End of Use 47 Philips Support 3 Energy Saving 38 Photos, Videos and Music 30 Equalizer 35 Picture Clean, Noise Reduction 34 European Eco-label 47...
  • Page 64 Picture Style 32 Update Software - Local Updates 4 Picture, Colour 33 Update Software - OAD 4 Picture, Contrast 33 Update Software - USB 4 Picture, Sharpness 33 USB Flash Drive 14 Power Cable 8 USB Hard Drive 37 Problems 50 USB Hard Drive - Format 14 Product Fiche 47 USB Hard Drive - Install 14...

This manual is also suitable for:

50pus65236523 series50pus6523/60

Table of Contents