Table of Contents
Advertisement
Remote control
This section includes an overview of the
remote control.
a
b
c
d
e
f
g
(Standby-On)
a
•
Switch this product on or to standby.
•
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b Source buttons
HDMI ARC: Switch your source to HDMI
ARC connection
Bluetooth: Switch to Bluetooth mode;
Press and hold three seconds to break the
current Bluetooth connection.
COAX: Switch your audio source to the
coaxial connection.
OPTICAL: Switch your audio source to
the optical connection.
AUDIO IN: Switch your audio source to
the AUDIO IN connection (3.5mm jack).
(Mute)
c
Mute or restore volume.
d VOL +/-
Increase or decrease volume.
e BASS +/-
Increase or decrease bass.
f TREBLE +/-
Increase or decrease treble.
g RESET
i
Set the bass and treble to the default
settings.
h AUDIO SYNC +/-
Increase or decrease audio delay.
i SURR. SOUND ON/OFF
h
Turn surround sound on or off.
Replace battery
Warning
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The product/remote control may or may not contain a
coin/button type battery, which can be swallowed. Keep
the battery out of reach of children at all times!
Caution
•
The battery contains perchlorate material,
handle it with care. For information see
www.dtsc.ca.gov/hazardouswaste/perchlorate.
EN
5
Advertisement
Table of Contents
