Features - Danby DPA120CB1WDB Owner's Use And Care Manual

Features

ELECTRONIC CONTROL INSTRUCTIONS AND OPERATING MODES
7
POWER button
1
Turns power on/off.
SLEEP button
2
Used to initiate the SLEEP operation.
FAN button
3
Controls the fan speed. Press to toggle between three fan speeds: HIGH (press 1 time), MEDI-
UM (press 2 times) and LOW (press 3 times). The fan speed indicator light indicates the correspond-
ing fan setting. Press the button a fourth time to initiate AUTO-FAN mode.
4
UP and DOWN buttons
Used to adjust (increase / decrease) temperature settings (1°C/1°F increments) in a range
of 17°C(62°F) to 30°C(86°F) or the TIMER setting in a range of 0~24hrs. The control is capable of
displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other,
press and hold the Up and Down buttons at the same time for 3 seconds.
MODE select button
5
Selects the appropriate operating mode. Each time you press the button, a mode is selected in
a sequence that goes from AUTO, COOL, DRY, and FAN. The mode indicator light illuminates de-
pending on the mode settings.
6 TIMER button
Used to initiate the AUTO ON start time and AUTO OFF stop time program, in conjunction with the up
& down buttons.
SWING button
7
(select models only) Used to initiate the Auto swing feature. When operating press the SWING
button to stop the louver at the desired angle.
LED DISPLAY
8
Shows the set temperature in °C or °F and the Auto-timer settings. While on DRY and FAN
modes, it shows the room temperature.
6 5
8
4 4
5
2
3 1