Auto Standby; Set Display Brightness; Apply Factory Settings; Update Software - Philips HTL3110B/12 User Manual

Auto standby

When playing media from a connected device,
the SoundBar automatically switches to standby
after 15 minutes of button inactivity and no
audio/video play from a connected device.

Set display brightness

You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In any source mode, on the remote control
press Volume-, BASS -, and TREBLE - in
sequence within three seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
EN
12

5 Update software

To get the best features and support, update
your product with the latest software.
What you need
• Connect this product to your TV through
HDMI.

Check software version

In HDMI ARC source mode, on the remote
control press TREBLE -, BASS -, and Volume- in
sequence.

Update software via USB

1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the download if zipped, and
make sure that the unzipped file is
named "HTL3110.BIN".
b Put the "HTL3110.BIN" file in the
root directory.
3
Connect the USB storage device to the
(USB) connector on this product.
4
Switch this product to the HDMI ARC
source, and switch your TV to the HDMI
source.
5
On the remote control, within 6 seconds
twice, and + (Volume) once, then
press
hold down SURROUND ON.
» If an upgrade media is detected, on the
TV screen you are prompted to start
the update.