Philips Lumea SC198 Series Manual page 24

Problem
The 'ready to
flash' light blinks
orange slowly but
the device does
not produce a
flash when I press
the flash button.
I cannot increase
or decrease the
light intensity
settings/The
intensity lights
and the 'ready to
flash' light are all
on.
The device
produces a
strange smell.
Possible cause
The device needs
to be reset.
The device needs
to be reset.
The light exit
window or the skin
tone sensor is dirty.
You have not
removed the hairs
on the area to be
treated properly.
These hairs may
get burned and can
cause the smell.
English
Solution
To reset the device, switch
it off and switch it on again.
To reset the device, switch
it off and switch it on again.
Clean the light exit window
and the skin tone
sensor carefully.
Pretreat your skin before
you use Lumea.
23