Table of Contents
Advertisement
Chapter 12
wireless channel unless you notice interference problems with another nearby access
point.
Channel Width:
Select the channel width from the drop-down list. The default setting is
Auto, which can adjust the channel width for your clients automatically.
Transmit Power:
Select Low, Middle, or
default and recommended setting is High.
¾ To change the security option:
1. Go to
Advanced
2. Select an option from the
options, No Security, WPA/WPA2 Personal (Recommended), and WPA/WPA2
Enterprise. WPA2 uses the newest standard and the security level is the highest.
We recommend you don't change the default settings unless necessary.
3. Click
Save
to make the settings effective.
¾ To enable band steering function:
Band steering can detect what a device supports and automatically assign it to the best
wireless band based on actual conditions to balance network demands.
1. Go to
Advanced
section.
2. Select the
Enable
12. 6. 2. View Wireless Information
¾ To view the detailed wireless network settings:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
High
>
Wireless
>
Wireless Settings
Security
>
Wireless
>
Wireless Settings
check box, and click
>
Status
page. You will find the
Customize Your Network Settings
to specify the data transmit power. The
page, and click
drop-down list. The router provides three
page, and locate the
Save
to make the settings effective.
Wireless
panel.
2.4GHz
or 5GHz.
Band Steering
76
Advertisement
Table of Contents
