Mp3 Player; Ipod Or Iphone - Philips HTB7530D/12 User Manual

Play buttons
Button Action
/ Select a preset radio station.
or
Alphanumeric
buttons
Navigation
Left/Right: Search for a radio
buttons
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS
Manual:
1) Press
2) Press
3) Press
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE
Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. When you
switch the tuning grid, all preset radio stations
are erased.
1
Press SOURCE repeatedly until RADIO
appears on the display panel.
2
Press .
3
Press and hold
50 kHz or 100 kHz.
EN
22
OPTIONS.
/ to select your
preset.
OPTIONS again
to store the radio station.
(Play) to toggle between

MP3 player

Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the MUSIC
iLINK connector on your home theater.
• If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2
Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.

iPod or iPhone

Connect a Philips dock to play music, photos,
and videos from your iPod or iPhone.
What you need
• A Philips dock (model: Philips DCK306x).
• A yellow composite video cable.
1
Connect the Philips dock to the DOCK
for iPod connector on your home theater.
2
To view slideshow from your iPod or
iPhone on your TV, connect the dock to
the TV by using the yellow composite
cable.
3
Switch on the iPod or iPhone, and place it
on the dock.
• Charge your iPod/iPhone on the dock
while the home theater is in iPod
mode.