Table of Contents
Advertisement
Installation
:
Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance is not installed
properly, this can be
dangerous. Make sure that:
The mains voltage on your
■
power socket matches the
rated voltage specified on
the appliance (identification
plate). The connected loads
and the required fuse
protection are specified on
the identification plate.
The appliance is only
■
connected to a source of
alternating current via a type
F socket that has been
correctly installed.
The mains plug and the type
■
F socket match and the
earthing system has been
correctly installed.
The cross section of the
■
cable is sufficiently large.
The mains plug is accessible
■
at all times.
If using a residual current
■
circuit breaker, only use one
that bears the following
mark: z. The presence of
this mark is the only way to
be sure that it fulfils all the
applicable regulations.
Safety instructions
:
Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance's mains cable is
altered or damaged, this may
result in electric shock, short
circuiting or fire due to
overheating.
The mains cable must not be
kinked, crushed or altered, and
must not come into contact with
any heat sources.
:
Warning
Risk of fire/material damage/
damage to the appliance!
The use of extension leads or
power strips may result in fire
due to overheating or short
circuiting.
Connect the appliance directly
to an earthed socket that has
been correctly installed. Do not
use extension leads, power
strips or multi-way couplers.
:
Warning
Risk of injury/material
damage/damage to the
appliance!
The appliance may vibrate or
■
move when in operation,
potentially resulting in injury
or material damage.
Place the appliance on a
clean, even, solid surface
and, using a spirit level to
guide you, level it with the
screw-in feet.
Ri s k of i n j u ry/materi a l damage/damage to the appl i a nce!
en
7
Advertisement
Table of Contents
