Download Print this page

Crosley BTD-2SP3-5 Quick Start Manual

Advertisement

Quick Links

BTD-2SP3-5 Dongle Specification
<Product Descriptions>
• The dongle fits for Sepura multi-pins
radio.(Except SC20)
• The dongle is compatible with many
Bluetooth headsets on the aftermarket.
• Just one-time pairing with wireless
headset/accessory
<Specification>
Type: Bluetooth Dongle for Portable Radio
Temp: -20℃±2℃ ~ 50℃±2℃
Approx. Weight: 30g
• Fully Qualified Bluetooth v5.0.
• Support
AES-128 and ECC-256
• Echo cancellation, noise reduction, also
extended features.
• High-Quality DAC, Qualcomm CVC built-in.
• 80MHz RISC MCU and 80MIPS Kalimba
DSP.
• No battery, no need charging.
• RoHS compliant.
• HSP / HFP / BLE profile support.
• PTT function: built-in.
• Talking Range: Bluetooth class 2, 10 meters.
• Display LED: Blue
• TX Current: 16 mA (Average).
• Talk time based on radio.
1

Advertisement

loading

Summary of Contents for Crosley BTD-2SP3-5

  • Page 1 BTD-2SP3-5 Dongle Specification <Product Descriptions> • The dongle fits for Sepura multi-pins radio.(Except SC20) • The dongle is compatible with many Bluetooth headsets on the aftermarket. • Just one-time pairing with wireless headset/accessory <Specification> Type: Bluetooth Dongle for Portable Radio Temp: -20℃±2℃...
  • Page 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 3 BTD-XXX-5 (dongle) Uer Manual <Procedure for Pairing Bluetooth headset device> (Note: The Bluetooth-PTT(PTT-Z) needs to switch off before performing the following steps if it has been connected to the dongle) 1. Switch the dongle power on while pressing and holding the PTT button at the same time for about 3 seconds.
  • Page 4 PS:Only BLE-PTT linked it will not work untilBT headset linked.