Machine Assembly - Acer AL1713bm Service Manual

MACHINE ASSEMBLY

This chapter contains step-by-step procedures on how to assemble the monitor for maintenance and
troubleshooting.
NOTE:
1. The screws for the different components vary in size. During the disassembly process, collect the screws with the
corresponding components to avoid mismatch when putting back the components.
2. The monitor surface is susceptible to scratching! Therefore, lay the monitor on a soft surface when mounting or removing
the base.
3. Wear gloves
Chassis*1
Gasket (20x10x3mm)*4
Cable ties*1
Control board*1
(PW3x6,M,ZN-CC)*
CPT Panel*1
(PW3x6, M, ZN-CC)*8
Cord keep*2
FFC (30pin)*1
TAPE, 3M#5491(19x60mm)*1
POW/INV board*1
(PW3x6,MΔ,S-TITE,ZN)*3
Out port
(PW3x6,MΔ,S-TITE,ZN)*3
(F3x8, MΔ,S-TITE, NI)*2
Interface board*1
(PW3x6,MΔ,S-TITE,ZN)*3
EMI shield*1
(PW3x6, M∆, S-TITE,ZN)*5
Mounting bracket
(F4x6, M, ZN)*4
Hinge L*1
Hinge R*1
(F4x6,M,ZN)*4
Back cover*1
(B3x8,T6,black)*2
22
Chapter 3
Speaker L*1
Speaker R*1
(B3x8,T6,black)*
Arm Stand*1
(P/2FW4x22,M,ZN)*
Rubber*4
Base
Stand plate*1
(F3x8,T6,ZN)*6
Hinge cover*1
Front bezel*1
Button*1
Indicator*1