New Holland D150C Tier 2 Service Manual page 47

Prod- Color Strength
uct
592 White 0.113 -
0.330 Nm (1
- 3 lb in)
598 Metallic 1.31 MPa
black (190 psi)
Prod- Color Strength
uct
204 Pink 12.4 - 24.9 Nm
(110 - 220 lb in)
222 Purple 4 - 14 Nm (35 -
124 lb in)
242 Blue 5.6 - 17 Nm (50
- 150 lb in)
243 Blue 7 - 24 Nm (62 -
212 lb in)
246 Blue 2 - 5.7 Nm (18 -
50 lb in)
262 Red 22 - 40 Nm (195
- 354 lb in)
271 Red 16.9 - 34 Nm
(150 - 300 lb
in)
277 Red 32 - 40 Nm (283
- 354 lb in)
INTRODUCTION
Gasket Sealants
Fixture/Full Recom-
Cure (Steel/ mended
Steel) Time Primer or
Activator
none
72 hrs
none
25 min/72 hrs
Thread Locker and Sealing
Fixture/Full Recom-
mended
Cure (Steel/
Steel) Time Primer or
Activator
none
10 min/72 hrs
20 min/3 hrs 7471 or
7469
3 min/6 hrs 7471 or
7469
10 min/1 hr 7471 or
7469
10 min/6 hrs 7471 or
7469
15min/7 hrs 7471 or
7469
10 min/24 hrs 7471 or
7469
30 min/7 hrs 7471 or
7469
47907877 06/10/2015
38
Description
Is a medium strength anaerobic sealant with
Teflon® for tapered pipe threads. The high
lubricating properties of this compound prevent
galling on pipe threads and fittings. It will provide
immediate low pressure sealing and allow the
readjustment of fittings shortly after assembly. After
72 hours the joint is sealed to pipe burst pressure.
This product resists aging, weathering and thermal
cycling without hardening, shrinking or cracking.
Typical applications include oil pans, transmission
pans, valve covers, valves and guides, timing
gear covers, and differential covers. This product
is typically used in applications with an operating
range of -54 - 260 °C (-65 - 500 °F).
Description
Is a dry-to-the-touch, preapplied film for threaded
fasteners. It remains inert on the fastener until
assembly of the threads releases a quick curing
resin. The resin fills all the voids in the threads and
cures to securely lock and seal the assembly.
Is designed for the locking and sealing of threaded
fasteners which require easy disassembly with
standard hand tools.
Is designed for the locking and sealing of threaded
fasteners which require normal disassembly with
standard hand tools.
Is designed for the locking and sealing of threaded
fasteners which require normal disassembly with
standard hand tools.
Is designed for the locking and sealing of threaded
fasteners which require normal disassembly with
standard hand tools. The product cures when
confined in the absence of air between close
fitting metal surfaces and prevents loosening and
leakage from shock and vibration. Particularly
suitable for heavy duty applications such as bolts
used in transmissions, construction equipment or
railroad assemblies where resistance to heavy
shock, vibration and stress level is required along
with exposure to elevated temperatures.
Is designed for the permanent locking and sealing
of threaded fasteners.
Is designed for the permanent locking and sealing
of threaded fasteners.
Is designed for the permanent locking and sealing
of threaded fasteners.