Channel Menu - Sharp LC-70UI9362 Operating Instructions Manual

TV Menu Operation

CHANNEL MENU

Use of the 'Channel' menu allows for
setting the TV up to receive incoming
aerial signals.
Note that this menu will change
depending on which aerial source is
being used. These options include:
• Terrestrial Digital Television
• Cable Digital Television
• Satellite Digital Television
• Analogue Television
DVB Antenna
Auto Scan
Tuning Mode
Auto Tuning
Digital Manual Tuning
Digital Smart Retuning
Auto Update Channel
List
HbbTV
LCN
Standby Scan
CI Information
Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV
aerial and be in a good Freeview/Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Note: Any Freeview HD channels found during tuning will be placed in channel positions above 100. For
example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
Note: Freeview channels are only available in the UK, Saorview channels are only available in the ROI.
22
Selected input antenna type.
Allows you to retune the television for all digital channels, digital radio
stations and analogue devices.
Digital, Analogue and Digital + Analogue.
When selected, the set will start tuning.
Allows you to manually tune your digital signal by selecting the channel
number. Press [OK] to start.
Enables the set to retune those channels already stored.
Can be set to "ON" or "OFF".
Allows interactive services like BBC red button+ using Digital TV broadcasting
when connected to the internet.
Logical Channel Number. When turned on, digital stations will be in order.
When the TV is put into standby mode a standby scan will be performed,
during this process the TV will scan for new channel information and
automatically update the channel list if any changes are found, both the
visual and audio functions will be off, once the scan is complete the TV will
stay in standby mode.
Pay per view services require a "Smartcard" to be inserted into the TV. If you
subscribe to a pay per view service the provider will issue you with a 'CAM'
and a "Smartcard". The 'CAM' can then be inserted into the COMMON
INTERFACE PORT (CI Card In).