Table of Contents
Advertisement
Y Y ou may adjust picture quality and enhancement settings using Pixel
Precise Ultra HD and Advanced settings sub menus.
Auto picture
Dynamic contrast
Backlight
Color enhancement
Contrast
Black stretch
Brightness
120 PMR
Color
4K UHD Upscaling
Tint
Macro Dimming
Sharpness
Noise reduction
Pixel Precise Ultra HD
MPEG artifact reduction
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
To select the desired setting, then press OK
Dynamic
contrast
(Off, Minimum, Medium and Maximum)
Off
To set color enhancement to off
Color
enhancement
To make colors more vivid and bright
On
Black
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
stretch
Off
To set 120 PMR to Off
120 PMR
On
To make the video appear smoother
To select the desired setting, then press OK
4K UHD
Upscaling
(Off, Minimum, Medium and Maximum)
To select the desired setting, then press OK
Macro
Dimming
(Off, Minimum, Medium and Maximum)
Noise
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
reduction
MPEG
To select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Auto picture
Backlight
Off
Contrast
Minimum
Brightness
Medium
Color
Maximum
Tint
Sharpness
Pixel Precise Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
alignment
Custom color
management
Gamma
Blue stretch To select the desired setting, then press OK
Film mode
•
Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–The connected HDMI device is outputting a video signal.
Color alignment
Custom color management
Gamma
Blue stretch
Film mode
To set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
Cursor
To decrease red
Red gain
contrast
Green gain To decrease green
Color
contrast
To decrease blue
Blue gain
contrast
To decrease red
Red offset
brightness
To decrease green
Green offset
brightness
Blue offset To decrease blue
brightness
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Cursor
To rotate only
selected color tint in
Tint
clockwise direction
To decrease color
Saturation
with only selected
color
To decrease
Brightness
brightness with only
selected color
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
(Off, Minimum, Medium and Maximum)
Off
To set film mode to off
To optimize the picture recorded by the
Auto
original film
Note(s)
32
.
English
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor
To increase red
contrast
To increase green
contrast
To increase blue
contrast
To increase red
brightness
To increase green
brightness
To increase blue
brightness
Cursor
To rotate only
selected color tint in
counterclockwise
direction
To increase color
with only selected
color
To increase
brightness with only
selected color
Continued on next page.
Advertisement
Table of Contents
