Specifications - Pioneer A-A9MK2-K Operating Instructions Manual

Integrated amplifier
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
06
Additional information

Specifications

Amplifier section
Power output specification is for when power
supply is 230 V.
Continuous power output (both channels
driven at 20 Hz to 20 kHz)**
Ω
THD 0.2 %, 4
. . . . . . . . . . . . . . . . . 70 W + 70 W
Ω
THD 0.2 %, 8
. . . . . . . . . . . . . . . . . 55 W + 55 W
Continuous power output (both channels
driven at 1 kHz)
Ω
THD 0.7 %, 4
. . . . . . . . . . . . . . . . . 73 W + 73 W
Ω
THD 0.7 %, 8
. . . . . . . . . . . . . . . . . 58 W + 58 W
Total harmonic distortion**
20 Hz to 20 kHz, 25 W, 8
* Measured with DIRECT button switched on.
** Measured by Audio Spectrum Analyzer
Audio section
Input (Sensitivity/Impedance)
CD, TAPE, TUNER, AUX . . . . . . . . . 200 mV/22 k
PHONO (MM) . . . . . . . . . . . . . . . . . .2.8 mV/47 k
PHONO (MC). . . . . . . . . . . . . . . . . . .0.3 mV/100
Frequency response
CD, TAPE, TUNER, AUX
. . . . . . . . . . . . . . . . . . . . . . . 5 Hz to 100 kHz
PHONO (MM) . . . . . . . . 20 Hz to 20 kHz ±0.2 dB
PHONO (MC). . . . . . . . . 20 Hz to 20 kHz ±0.3 dB
PHONO (MM) overload level
1 kHz, THD 0.2 %. . . . . . . . . . . . . . . . . . . . . . 60 mV
PHONO (MC) overload level
1 kHz, THD 0.2 %. . . . . . . . . . . . . . . . . . . . . . . 6 mV
Output (Level/Impedance)
TAPE REC . . . . . . . . . . . . . . . . . . . . . 200 mV/1 k
Tone control
Bass . . . . . . . . . . . . . . . . . . . . . . .± 10 dB (100 Hz)
Treble . . . . . . . . . . . . . . . . . . . . . .± 10 dB (10 kHz)
18
En
Ω
. . . . . . . . . . . . 0.05 %*
Ω
Ω
Ω
dB
Ω
Signal-to-Noise Ratio (IHF SHORTED,
A-NETWORK)
CD, TAPE, TUNER, AUX (200 mV input) . .103 dB
PHONO (MM, 2.8 mV input) . . . . . . . . . . . . .80 dB
PHONO (MC, 0.2 mV input) . . . . . . . . . . . . .70 dB
Miscellaneous
Power requirements
. . . . . . . . . . . . . . . .AC 220 V to 230 V, 50 Hz/60 Hz
Power consumption . . . . . . . . . . . . . . . . . . 200 W
In standby. . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 W
Dimensions
. . . . . . . 420 mm (W) x 113 mm (H) x 369 mm (D)
Weight (without package) . . . . . . . . . . . . . .11.5 kg
Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . .1
AAA/IEC R03 dry cell batteries
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Operating instructions (This document)
Note
• Specifications and the design are subject
to possible modifications without notice,
due to improvements.
. . . . . . . . . . . . .2

Advertisement

Table of Contents
loading

Table of Contents