Table of Contents
Advertisement
Privacy mask
Click Privacy Mask to open the configuration page. On this page, you can block out certain sensitive
zones to address privacy concerns.
■ To configure the privacy mask windows, follow the steps below:
1. Click New to add a new window. A text box will appear allowing you to enter a name for the mask.
2. Use four mouse clicks to mark a square area, which is recommended to be at least twice the size of
the object (height and width) you want to cover.
3. Enter a Window Name and click Save to enable the setting.
4. Check Enable privacy mask to enable this function.
NOTE:
► Up to 5 privacy mask windows can be configured on the same screen.
►
To delete a mask, use the red cross button and then click on the Save button.
4x
VIVOTEK
User's Manual - 67
Advertisement
Table of Contents
