Parts And Functions; Control Panel - Philips Signage Solutions 42BDL5057P User Manual

42BDL5057P
2.

Parts and Functions

2.1.

Control Panel

1
2
3
4
5
6
7
8
9
[ ] button
1
Use this button to turn the display on or put the display to standby.
[MUTE] button
2
Switch the audio mute ON/OFF.
[INPUT] button
3
Choose the input source.
• Used as [ ] button in the On-Screen-Display menu.
[ ] button
4
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
[ ] button
5
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
[ ] button
6
Move the highlight bar up to adjust the selected item while OSD
menu is on.
[ ] button
7
Move the highlight bar down to adjust the selected item while OSD
menu is on.
[MENU] button
8
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and
red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
* Using IR sensor cable for better remote control performance.
(Please refer to the instructions of 3.5)
6