Door Features; Door Rails; Door Bins; Utility Compartment - Whirlpool WRT318FMD Installation Instructions And Owner's Manual

Top mount refrigerator
Table of Contents

Advertisement

Available languages

Available languages

Your model may have some or all of these features.

Door Rails

The door rails may be removed for easier cleaning.
To remove and replace the rails:
1. Depending on your model, remove the rails by pushing in
slightly on the front of the bracket while pulling out on the
inside tab. Repeat these steps for the other end.
2. Replace the rails by aligning the ends of the brackets with the
buttons on the sides of the door liner. Firmly snap bracket
and assembly onto the tabs above the shelf as shown.

Door Bins

To remove and replace the bins:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.

DOOR FEATURES

The utility compartment may be removed for easier cleaning.
To remove and replace the utility compartment:
1. Remove the utility compartment by squeezing against one
side while raising the utility compartment up and pulling it
straight out.
2. Replace the utility compartment by positioning one side in
the lock and sliding in the opposite side until it stops.

Utility Compartment

15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents