Dell 1210S User Manual page 30

Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings).
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced, the projector automatically switches to
Custom.
B —Use
RIGHTNESS
C —Use
ONTRAST
S —Allows you to adjust the video source from black and white to fully
ATURATION
saturated color. Press
increase the amount of color in the image.
S —Press
HARPNESS
sharpness.
T —Press to increase the amount of green in the image and
INT
the amount of red in the image (available for NTSC only).
A —Press
DVANCED
ADVANCED" below.
NOTE:
Saturation, Sharpness, and Tint are only available when input source is
from Composite or S-Video.
PICTURE ADVANCED
Using the Picture Advanced menu, you can adjust the display settings of your
projector. The Picture Advanced menu provides the following options:
W I —Use
HITE NTENSITY
C T —Allows you to adjust the color temperature. The screen appears
OLOR EMP
cooler at higher color temperatures and warmer at lower color temperatures.
When you adjust the values in the Color Adjust menu, the Custom mode is
activated. The values are saved in the Custom mode.
30 Using Your Projector
to
and adjust the brightness of the image.
and to adjust the display contrast.
to decrease the amount of color in the image and
to decrease the sharpness and
to activate Picture Advance Menu. See "PICTURE
and to adjust the display white intensity.
increase the
to
to increase
to