Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Datavideo VP-300R
Summary of Contents for Datavideo VP-300R
- Page 1 VP-300R...
-
Page 2: Table Of Contents
SERVICE & SUPPORT .............. 12 Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. -
Page 3: Fcc Compliance Statement
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. -
Page 4: Warranty
Warranty Standard Warranty Datavideo equipment are guaranteed against any manufacturing defects for one year from the date of purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. -
Page 5: Three Year Warranty
PCIe Card are covered for 1 year. The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. Disposal For EU Customers only - WEEE Marking... -
Page 6: Introduction
Moreover, the VP-300R can be powered independently. Note: Please pay attention that there are 4 VP-300R intercom repeaters can be connected to an ITC-300 simultaneously. Those 4 VP-300Rs must be connected to 4 random channels among the total 8 channels of the ITC-300. Those 4 VP- 300Rs can not be connected in cascade connection. -
Page 7: System Diagram
System Diagram... -
Page 8: Connection And Control
Connection and Control Front Panel MAIN UNIT RJ-45 Interface It is the RJ-45 interface for connecting the RJ-45 interface of the ITC-300 main unit by an Ethernet cable (CAT6, 23AWG). BELT PACK RJ-45 Interface It is the RJ-45 interface for connecting the RJ-45 interface of the ITC-300SL belt pack by an Ethernet cable (CAT6, 23AWG). -
Page 9: Specifications
Specifications Max. 200 meter/ 660 feet (cascade) Transmission Distance Transmission Signal Types Intercom, Tally and Power. RJ-45 x 2，(10/100Mbps). One is for main Connectors unit and the other is for belt pack. LED Indicator LED Link Indicator x 2 Operating Temperature 0°C to 40°C (32°F to 104°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) - Page 10 Note...
- Page 11 Note...
-
Page 12: Service & Support
Datavideo Technologies Co., Ltd. All rights reserved 2020 Ver:E 1 Aug.-15.2019...