Auto Clean(Optional); Setting The Current Time; Timer Setting; To Cancel The Timer Setting - LG LG3ZMSS511 Owner's Manual

Operating Instructions

Auto Clean(Optional)

o During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification
operation can be removed.
This function operate when the unit is turned off.

Setting the Current Time

1. Press the TIMER button for 3 seconds.
2. Press TIME SETTING buttons
until the desired time is set.
NOTE
Check the indicator for A.M. and P.M.

Timer Setting

1. Press the TIMER button to
turn timer on or off.
2. Press TIME SETTING buttons
until the desired time is set.

To cancel the Timer Setting

• If you wish to cancel all timer setting, press the CLEAR ALL or SET/CLEAR button.
• If you wish to cancel each timer setting, press the
TIMER button to turn timer sleep or on or off as you want.
And then press the SET/CLEAR button aiming the remote
controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)
16 Multi Air Conditioner
[Standard / Artcool Mirror / Ceiling Cassette Type]
1. Press the FUNCTION SETTING button 1 time.
Auto Clean symbol will blink.
2. Press the SET/CLEAR button to reserve or cancel the Auto Clean function.
[Standard Libero Type]
• Press the Auto Clean button.
If the Auto Clean function is reserved, whenever the unit is turned off, the indoor fan
is still running for about 30 minutes internally without cooling or dehumidification
operation. Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
3. Press the SET / CLEAR button.
3. Press the SET / CLEAR button.