Mattel Hot Wheels RC W6458-0920 User Manual page 2

II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 4 AA alkaline batteries for the vehicle and 2 AA
alkaline batteries for the transmitter. Batteries not included.
Vehicle
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Your vehicle requires 4 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
3. Replace battery cover and tighten screw.
Transmitter
1. Remove the battery cover.
2. Transmitter requires 2 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
3. Replace battery cover and push shut.
NOTE: Once the batteries are installed the transmitter
will always be "ON" and will work automatically the
moment you use it.
III. OPERATION
FORWARD LEFT OR RIGHT
OR
FORWARD REVERSE
REVERSE LEFT OR RIGHT
OR
4 x AA
2 x AA