Table of Contents
Advertisement
DisplayPort Ver.
Select the DisplayPort version to use.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the product (when set to DisplayPort) is displaying the message
settings of the source device.
press the JOG button to display the function-button screen and then select
→
System
→
DisplayPort Ver.
→
1.1
or 1.2↑.
HDMI Mode
Select the HDMI mode to use.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the
HDMI Mode
to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
― This menu is not available when
PIP/PBP Mode
Check the cable connection and the
is set to
On
and the
Size
is set to
(PBP Mode).
Eco Saving Plus
Reduce energy consumption compared to consumption at the maximum brightness level.
― This option is not available when
SAMSUNG
Bright
MAGIC
― This menu is not available when
Game Mode
― This menu is not available when
Eye Saver Mode
― Not available when
PIP/PBP Mode
is set to On.
•
Off: Deactivate the
Eco Saving Plus
function.
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: Saves up to 25 % energy compared to the maximum brightness.
•
High: Saves up to 50 % energy compared to the maximum brightness.
is in
Dynamic Contrast
mode.
is enabled.
is enabled.
37
Advertisement
Table of Contents
