Table of Contents
Advertisement
5.
OSD Timeout: Adjust the delay before turning the off the OSD menu.
6.
Transparency: Select the transparency when using gaming mode. The
transparency can be 0% (OFF), 20%, 40%, 60%, or 80%.
7.
Refresh rate num: Display the panel's current refresh rate on the screen.
Adjusting the System
1.
The System menu can be used to select settings such as Input, Wide
Mode, and others.
2.
Press the MENU key to open the OSD.
3.
Using the
setting you wish to adjust.
4.
Use the / keys to select the setting.
5.
Input: Select the source from HDMI, DP In or VGA.
6.
Auto Source: Automatically searches for available input sources.
7.
DP Format: You can select which DP format you are using. The default is
set at DP1.2.
8.
Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
9.
Wide Mode: You can select which screen aspect you are using. The
options are Full and Aspect.
10. DDC/CI: Allows the monitor settings to be set through the software on
the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
/
keys, select System from the OSD. Then navigate to the
EN-17
Advertisement
Table of Contents
