Table of Contents
Advertisement
Changes are not saved
If the router does not save the changes that you make in the router web interface, do
the following:
• When entering configuration settings, always click the Apply button before moving
to another page or tab, or your changes are lost.
• Click the Refresh or Reload button in the web browser. It is possible that the changes
occurred, but the old settings might be in the web browser's cache.
Troubleshoot WiFi connectivity
If you are experiencing trouble connecting over WiFi to the router, try to isolate the
problem:
• Does the WiFi device or computer that you are using find your WiFi network?
If not, check the WiFi LED on the router. If it is off, you can press the WiFi On/Off
button on the router to turn the router WiFi radios back on.
If you disabled the router's SSID broadcast, then your WiFi network is hidden and
does not display in your WiFi client's scanning list. (By default, SSID broadcast is
enabled.)
• Does your WiFi device support the security that you are using for your WiFi network
(WPA, WPA2, or WPA3)?
• If you want to view the WiFi settings for the router, use an Ethernet cable to connect
a computer to a LAN port on the router. Then log in to the router, and select
BASIC > Wireless.
Note: Be sure to click the Apply button if you change settings.
If your WiFi device finds your network but the signal strength is weak, check these
conditions:
• Is your router too far from your computer or too close? Place your computer near
the router but at least 6 feet (1.8 meters) away and see whether the signal strength
improves.
• Are objects between the router and your computer blocking the WiFi signal?
Troubleshooting
Nighthawk AX6 6-Stream AX5400 WiFi Router
156
User Manual
Advertisement
Table of Contents
