Using The Ir Receiver; Portrait Layout - LG 55WT30MS Owner's Manual

10
ASSEMBLING AND PREPARING

Using the IR Receiver

This allows a remote control sensor to be placed
in a custom location. The IR receiver is made
with a magnet. Attach the magnetic sheet to the
desired position on the product. It is recommended
to attach it to the location illustrated in the figure
below.
NOTE
Do not attach the IR receiver to the surface
of the monitor or within 50 cm of it in any
direction.

Portrait Layout

To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking from
the front.