LG T1309ADFH6.ASSELAT Owner's Manual page 22

CYCLE MODIFIER BUTTONS
RINSE + SPIN
Select this option to rinse and spin a load
separately from a regular cycle. This can be helpful
in preventing fresh stains from setting in fabrics.
• You can change rinse temperature and spin
speed by pressing WASH/RINSE and SPIN
SPEED respectively.
Press the POWER button to turn on the
1
washer.
2 Press the SPECIAL USE button until the
RINSE+SPIN indicator light is lit. (The cycle
light will turn off.)
3
Press the START/PAUSE button to start the
cycle. The washer will start automatically.
SPIN ONLY
This button activates the Drain & Spin cycle to
drain and spin.
Press the Power button to turn on the washer.
1
Press the SPECIAL USE button until the SPIN
2
ONLY indicator light is lit.
Press the START/PAUSE button to start the
3
cycle. The washer will start automatically.
STAIN CARE™
STAIN CARE™ may be selected as an option
with HEAVY DUTY, COTTON/NORMAL and
TOWELS cycles.
• Wash only small loads for optimum fabric
care. (less than 8 lbs.)
1
Press the POWER button to turn on the
washer.
2
Press the SPECIAL USE button until the
STAIN CARE™ indicator light is lit.
3
Press the START/PAUSE button to
start the cycle. The washer will start
automatically.
NOTE: If you select STAIN CARE™, the
COLDWASH™ option is not available.
(cont.)
SOAK
Allows the consumer to remove stains more
thoroughly by specifying additional time for the
clothing to soak during washing. At the end of
SOAK, the wash cycle will be started without
drain.
• Cycle time will be increased by 30 minutes.
• It is normal that washer do weak agitation
during SOAK cycle.
NOTE: You cannot select the SOAK option in the
TUB CLEAN cycle.
H O W TO U S E
21