Cycle Settings And Options; Special Functions - LG DT22BSSG1 Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

Cycle Settings And Options

SENSOR DE SECADO(SENSOR DRY) cycles have preset
settings that are selected automatically. SECADO
MANUAL(MANUAL DRY) cycles have default settings,
but you may also customize the settings using the cycle
setting buttons. Press the button for that option to view
and select other settings.
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
nivel de secado(dry level)
Selects the level of dryness for the cycle. Press the
Nivel de Secado(Dry Level) button repeatedly to scroll
through available settings.
• This option is only available with SEnSOR DE
SECADO(SENSOR DRY) cycles.
• The dryer will automatically adjust the cycle time.
Selecting Seco(More) Dry or Muy Seco(Very) Dry will
increase the cycle time, while Menos Húmedo(Less) Dry
or Húmedo(Damp) Dry will decrease the cycle time.
• Use a Menos húmedo(Less) Dry or húmedo(Damp) Dry
setting for items that you wish to iron.
control temp.
Adjusts the temperature setting from Muy Baja(Ultra
Low) to Alta(High). This allows precise care of your
fabrics and garments. Press the Control Temp.button
repeatedly to scroll through available settings. Temp
control is not adjustable in SENSOR DE SECADO(SENSOR
DRY) cycles.
tiempo de secado(time dry)
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles. Use the Más Tiempo/
Menos Tiempo (More Time/Less Time) Time buttons to
add or reduce the drying time in 1-minute increments.
alrama(signal)
Adjusts the volume of the Alrama(Signal) or turns off
the Alrama(Signal). Press the button repeatedly until the
desired volume setting is illuminated.
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain
option buttons also feature a special function that can
be activated by pressing and holding that option button
for 3 seconds.
to add cycle options to a cycle:
1. Turn on the dryer and press the Cycle buttons to
select the desired cycle.
2. Use the cycle settings buttons to adjust the settings
for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press the INICIO/PAUSA(START/PAUSE) button to start
the cycle. The dryer will start automatically.
MFL70442615_en_190426.indd 41
alerta de secado Húmedo (damp dry signal)
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you would
like to iron or hang while still slightly damp. Press the
Alerta de Secado Húmedo (Damp Dry Signal) button to
activate or deactivate Alerta de Secado Húmedo (Damp
Dry Signal).
anti arrugas(Wrinkle care)
Selecting this option will tumble the load periodically for
up to 3 hours after the selected cycle, or until the door is
opened. This is helpful in preventing wrinkles when you
are unable to remove items from the dryer immediately.

Special functions

The option buttons also activate special functions,
including Control de Bloqueo(Control Lock) and Secado
en Rejilla(Rack Dry).
Select the option by pressing the option button. Press
and hold the option button for special features marked
with the asterisk (*), such as Control de Bloqueo(Control
Lock).
* secado en rejilla(rack dry)
Use Secado en Rejilla(Rack Dry) with items, such as wool
sweaters, silk, and lingerie, that should dry flat. Secado
en Rejilla(Rack Dry) can also be used with items that
should not be tumbled dry, such as gym shoes or stuffed
animals.
NOTE
NEVER tumble dry a load of clothing with the rack
installed. When the rack is installed, the drum will
rotate as usual, but the rack will not move. Make sure
all articles to be dried remain completely on the rack
and cannot fall off or be pulled off by the turning
drum. Be sure to remove the rack after use.
to install the drying rack:
1. With the dryer door open, slide the rack into the dryer
drum.
2. Make sure it is seated evenly on the edge of the inner
door rim and resting flat on the inside of the dryer.
41
HOW TO USE
2019.4.26 9:54:47 AM

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dt22vssg

Table of Contents