Sony VPL-FHZ85 Setup Manual page 37

Connecting to a Computer via a Hub or Router
Using a LAN terminal
Connect the LAN terminal and the computer LAN terminal via a hub or router.
Notes
 When using network features via the LAN terminal, be sure to check if "LAN Setting" is set to "LAN Port" under "HDBaseT
Settings."
 Connect the projector to the network that is constructed to control the access from the internet, such as LAN. If the
projector is connected directly to the internet, the security risk is increased.
When you monitor and control the projector via the network, access the Control Window of the
projector (refer to "Using Network Features" in the Help Guide) via a Web browser and enable the
desired control protocol.
LAN cable (straight type) (not supplied)
Hub, router, etc
37
GB
Connecting