Advertisement
Available languages
Available languages
Assemble the CYLINDER (79) to the Cylinder caddy. See detail 12-A.
Place the CYLINDER RETAINER WIRE (77) over the Cylinder Collar. See detail 12-B.
Step
Attaching TYPE 1 fitting to the fuel outlet valve in detail 12-C
12
Outlet
Valve
12-A Set CYLINDER (79) in the cylinder caddy with
the outlet valve facing the front of the grill.
IMPORTANT!
T
O ENSURE PROPER GAS FLOW
"OFF"
CONTROL VALVES MUST BE
OPENING THE GAS CYLINDER VALVE
12-B
12-A
79
12-B Place the CYLINDER RETAINER WIRE (77)
over the Cylinder collar, by rotating the wire
from the original position toward the cylinder
collar.
WARNING:
grill and when attaching or replacing the
L.P. gas cylinder, insure that the gas
supply hose is free of kinks and/or
,
damage and is at least 3" away from hot
BURNER
BEFORE
surfaces such as the grill casting.
.
77
Left end
12-C Insert the TYPE 1 nipple of the regulator (27)
During assembly of
77
Outlet
Valve
TYPE 1
Nipple
27
79
into the cylinder's fuel valve outlet as shown.
Turn the regulator hand wheel clockwise to
tighten. No tools are needed. The Hand
wheel will come to a complete stop when the
connection is secure and gas will not flow until
a positive seal is achieved.
11412077AX (Pg. 14)
12-C
Advertisement
