Related Manuals for Husqvarna HQ-2000SR
Summary of Contents for Husqvarna HQ-2000SR
- Page 1 Article 585 44 55-01 / HQ-2000SR 2000 LB STEEL ARCHED LOADING RAMPS Patent US5645394 6002411-REV B 11/13 Assembled in U.S.A of domestic and imported components...
-
Page 2: Safety Rules
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using these loading ramps. -
Page 3: Carton Contents
Carton Contents 13 (x2) 2 (x2) 1 (x2) 12 (x4) 3 (x4) 4 (x4) 5 (x4) 6 (x8) 7 (x4) 8 (x8) 11 (x8) 10 (x8) 9 (x8) TOOLS REQUIRED FOR ASSEMBLY: • 3/4" Wrench or Socket • Adjustable Wrench •... - Page 4 Assembly Instructions Attach support bars to ramp top. Tighten bolts at this time. Slide support bar pads onto bars as shown. Note: Apply soapy water inside support bar pad, this will allow the pad to slide onto the bar easier. Invert ramp bottom so that flanges face up.
-
Page 5: Maintenance
Operating Instructions USAGE: Look for a wall or depression to reduce the loading angle, the lower the ramp angle the easier the loading of the vehicle will be. Park the loading vehicle on flat, firm, or grassy terrain. Set the emergency brake and chock the tires of the loading vehicle to prevent any movement while loading and unloading the equipment. -
Page 6: Warranty
United States. In the space below record the purchase date of your Loading Ramps. Model Number HQ-2000SR / Article 585 44 55-01 Purchase Date Keep this Owner's Manual and your receipt in a safe place for future reference. -
Page 7: Repair Parts
Repair Parts REPLACEMENT PARTS ORDERING 1-800-652-2321... - Page 8 Notes...
- Page 9 (800)-652-2321...