Canon EOS 250D Advanced User's Manual page 77

[ ] Brightness
z
Adjust image brightness.
[ ] Contrast
z
Adjust contrast.
] Saturation
[
z
Adjust the vividness of colors.
[ ] Color tone 1
z
Adjust amber/blue color tone.
[ ] Color tone 2
z
Adjust green/magenta color tone.
[ ] Monochrome
z
Set the toning effect for monochrome shooting. Set to [Off] to shoot
in color. [Saturation], [Color tone 1], and [Color tone 2] are not
available with options other than [Off].
[Background blur] is not available when the flash is used.
z
These settings are reset when you switch shooting modes or set the power
z
switch to <2>. To save the settings, set [z: Retain Creative Assist data]
to [Enable].
<i> appears in the lower left of the viewfinder if you change the settings with
z
[z: Retain Creative Assist data] set to [Enable].
Saving Effects
To save the current setting to the camera, press the <B> button on the
Creative Assist setting screen, then select [OK]. Up to three presets can
be saved as [USER*]. After three have been saved, an existing [USER*]
preset must be overwritten to save a new one.
77