3. How to use the Rotating Bezel to
measure time
<To check the elapsed time>
Align the zero mark "
" of the
1)
rotating bezel with the position of the
minute hand.
Then, read the scale above the rotating
2)
bezel, to which the minute hand points
so as to figure out the elapsed time.
As shown in the illustration, the
elapsed time is 10 minutes.
6
<To check the remaining time>
Set the "" mark to the scheduled time.
•
You can now see the amount of time that
Time
remains until the scheduled point.
elapsed
Note: The rotating bezel of Divers
watches conforming to ISO or JIS
standards, can only be rotated
Minute hand
counterclockwise in order to
reduce the risk of error.
Minute hand
Remaining
time
7