Clearing A Blockage - Hoover HURRICANE HU71HU02 User Manual

CHanging THE BELT Or BrUSHES
If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first please make
sure you have:
• Emptied the dust container
• Cleaned the filters
• Checked for blockages
Turn the cleaner over and
1
remove 6 retaining screws
attaching the brush guard
to the base.
Remove the brush guard
2
Remove brush assembly and
3
check for wear on the belt.
Loop the new belt around
the motor and brush
channel.
* Certain models only.
imPOrTanT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
Hold the brush assembly and
4
stretch the belt until the brush
can be slotted back into
the cleaner housing.
Rotate the brush to ensure
5
movement of the belt.
Refit the brush guard with 6
6
retaining screws.
- 7 -

CLEaring a BLOCKagE

imPOrTanT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
If cleaning tools were
in use check the
cleaning tool and the
removable handle.
Check the hose by
removing it from the
cleaner, stretching it to
full length .
Turn the cleaner
over and rotate the
brushes until they
are free to rotate.
Check for a blockage in
the hose socket. Use a
flexible rod to remove
any obstruction.
Removing a blockage from
the Pet hair & allergen
remover.
Open the nozzle at each
side, lift cover and remove
the blockage.
*Certain models only.