Pioneer HTP-076D Manual page 85

Setting Item Default Value
USB Power Out Off
at Standby
6. Miscellaneous
„ 1. Tuner
Change the settings for TUNER.
Setting Item Default Value
FM Search Level Normal
DAB Auto Scan -
DAB DRC Off
Setting Details
When this function is set to "On", electricity can be
supplied to the Streaming media player connected
to the POWER OUT port even if this unit is in
standby mode.
• The POWER OUT jack is cannot supply power to
smart phones/tablets or other devices.
• While using this function, power consumption
increases in standby mode, however, the
increase in power consumption is minimized by
automatically entering the HYBRID STANDBY
mode where only the essential circuits are
operating.
Setting Details
If automatic tuning regularly stops on FM stations with weak
reception when "Normal" is selected, select "Strong" so only
those FM stations with strong reception are selected.
You can run the auto scan when new DAB stations
are added or when you move house.
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening
at low volume levels - ideal for listening to the radio
late at night when you don't want to disturb anyone.
"Off": DRC off
"Large": Large reduction in dynamic range
"Small": Small reduction in dynamic range
Contents Connections
≫
„ 2. Firmware Update
Change the settings for Firmware Update.
Setting Item Default Value
Version -
Update via USB -
„ 3. Initial Setup
Make the initial setup from the setup menu.
„ 4. Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value
Setup Parameter Unlocked
85
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
The current firmware version is displayed.
Press ENTER to select when updating the firmware
via USB.
Setting Details
Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
≫