Table of Contents
Advertisement
a. Press "P" key , then user can address this page for function adjustment.
b. After page selection is addressed, the user can press " " " " key for function selection.
After function is selected, then press " S " key for control selection, then press " " " " for
control volume adjustment.
c. Press " " + " " two keys, the "Recall" function is effective, meanwhile, there is a mark
"
the factory preset data will be returned to original factory setting.
d. The control volume of each parameter is shown by numeric number and scale.
e. Each page of the OSD is divided into two parts, one is controlled part for the display of
controlled selection and adjustment, the other is indicated part for the display of operating
description.
f. The background color of controlled part is "blue", the foreground is "white", the background
color of selected icon is "yellow" , the selected item is "red".
g. The background color of indicated part is "red" , the foreground is "white" , the background
color of the key indicated color is "yellow", the foreground is "red".
(5) The 2nd page: this page is defined as color weight adjustment and degaussing functions.
The operation procedures are as follows:
a. Press page 2 times to enter to this page for function adjustment.
b. Degaussing
Press the " " " " key to first icon then press " S " key, the monitor will auto degauss.
c. For the C1 C5 are color storage area, which with factory preset and also can be modified by
user.
The preset information as follows:
d. Color setting
Press " " " " key to choose which mode you want to modify, then press " S " to choose
which color you want to modify, then press " S " again to modify the weight of the chosen
color.
(6) The 3rd page: this page will be defined as "status display" field, which can show the
resolution,
horizontal frequency and vertical frequency status.
1.4.3.2 Presetting
The display modes which their timings are shown in section 3.1.4 are presetted by factory on the
manufacture to meet all the requirements of this specification. The user can press the " " + " "
button to recall the factory installed preset display settings at any present operating mode to
replace the existing user installed display settings.
1.4.3.3 User Setting
When user changes the display settings, such as: H-size, H-phase, V-size, V-center, and
Side-pincushion, Trapezoid, parallelogram, Tilt, Brightness, Contrast, iColor, all the changes will
be saved automatically after about 20-second delay when finished the settings or press " S " to
save the settings immediately.
1-16
" will be shown on the screen, then all of the parameters of current display mode that has
COLOR MODE
C1
C2
C3
C4
C5
No Copy/Reproduction Allowed
COLOR TEMPERATURE
PRESET
9300K
6500K
5500K
7100K
11500K
API Confidential
7277e Monitor Service Guide
Advertisement
Table of Contents
