Advertisement
FENDER MUSICAL INSTRUMENTS CORPORATION
•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC
power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
•WARNING: The unit must only be connected to a safety agency certified, regulated,
power source (adapter), approved for use and compliant with applicable local and
national regulatory safety requirements.
•Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth
for cleaning and then wait until the unit is completely dry before reconnecting it to power.
•Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable
of producing very high sound pressure levels which may cause temporary or permanent
hearing damage. Use care when setting and adjusting volume levels during use.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
IMPEDANCES
POWER SUPPLY
POWER REQUIREMENTS
DIMENSIONS
WEIGHT
CORONA, CALIFORNIA, U.S.A.
Fender
®
is a registered trademark of FMIC.
Copyright © 2022 FMIC. All rights reserved.
PN 7724435000 REV B
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL LANGUAGES
Manual available in additional languages at
www.fender.com/support
Input: 500k
9VDC regulated adapter,
5.5 x 2.1 mm barrel connector, center negative
100mA @ 9VDC
2.44" x 4.4" x 2.2" (62mm x 1 1 1.8mm x 55.9mm)
0.50 lbs (0.23kg)
Product specifications subject to change without notice
A PRODUCT OF
SPECIFICATIONS
Output: 470
Advertisement
