Advertisement
Bracket: How to Remove the M.2 SSD (Type 2280) and the Bracket
C1
如何移除2280 M.2 SSD及其托架 / M.2-SSD (Typ 2280) und Halterung entfernen / Comment retirer le SSD M.2 (Type 2280) et le support / Come rimuovere l'SSD M.2 (tipo 2280) e la staffa /
Cómo quitar la unidad de estado sólido M.2 (tipo 2280) y el soporte /
제거하는 방법 / M.2 SSD (タイプ 2280) とブラケットを取り外す方法
How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket
for a M.2 SSD (Type 2280)
1. Release the screw and carefully remove the M.2
2. Release the screw and remove the bracket
SSD (Type 2280).
from the motherboard.
M.2 SSD: How to Install the M.2 SSD (Type 2260)
C2
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2 /
M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
1. Locate the M.2 slot on the motherboard.
2. Carefully insert the M.2 SSD into the
Install the stando .
slot.
2.5-inch Hard Drive: How to Install the Hard Drive
D
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
VIDEO TUTORIAL
Scan the QR code to watch the
step-by-step video tutorial on how
to install the hard disk drive on
the NUC BOX-J6412.
1. Remove the four screws on the bottom case.
2. Attach the HDD to the hard drive
en li up and remove the bottom panel.
mounting bracket and secure it using
the four screws.
4. Attach the HDD assembly to the bottom
5. Connect the SATA Cable to the connector.
panel and secure it using the four screws.
SSD M.2 (
2280)
/ Como remover o M.2 SSD (Tipo 2280) e o suporte / M.2 SSD (Type 2280) 및 브래킷을
w to Install the Bracket for a M.2 SSD (Type 2280) /
3. Tighten the screw to secure the M.2 SSD
to the motherboard.
3. Connect the SATA Data and Power Cable to
the HDD.
6.
en reinstall the bottom panel.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
NUC BOX-J6412.
Positions of the NUC BOX-J6412
NUC BOX-J6412擺放 / Positionen der NUC BOX-J6412 / Positions de la série NUC BOX-J6412 / Posizioni della NUC BOX-J6412 / Posiciones de la NUC BOX-J6412 /
NUC BOX-J6412 / Posições de NUC BOX-J6412 / NUC BOX-J6412 시리즈의 위치 / NUC BOX-J6412シリーズの位置
e NUC BOX-J6412 can be placed in vertical or horizontal position.
/
Horizontal Position
Vertical Position
*Please note that keeping the NUC BOX-J6412 in a vertical position will ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
2. Attach the VESA Bracket to the rear of
3. Mount the NUC BOX-J6412 by sliding
a compatible display using the four screws.
it into place.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
VESA-mounted
Advertisement
