Indicator Lights; Status Indicator Light - Brother MW-260 User Manual

Indicator lights

" Status indicator light

A blue or green light indicates the printer is
operating correctly, while a red light indicates
an error has occurred.
Indicator
light color
Blue
Green
Red
When the status indicator light is blue, it is possible to receive data
using both the Bluetooth and USB interfaces. However, once a
connection is established using one of the interfaces, data cannot
be received using the other interface until printing is complete.
If an error has occurred, check for the following causes.
Error description
There is no paper cassette
installed.
The paper cassette is installed
facing the wrong direction.
There is no more paper.
A paper misfeed occurred.
A transmission error occurred. Check the transmission status.
An overheat error occurred.
24
Indicator light
status
Constantly lit
Flashing
Flashing in
long intervals
Constantly lit
Flashing
Flashing
Constantly lit
Printer status
Waiting to receive data using Blue-
tooth or the USB
Communicating (receiving print data)
Sleep mode (power-saving standby
condition, possible only when receiving
data using Bluetooth)
Waiting to receive data using USB or IrDA
Communicating (receiving print data)
An error has occurred.
A system error has occurred.
Correctly install a paper cas-
sette containing paper.
Remove the misfed paper.
The inside of the printer has started
to overheat. Wait until it cools down
Remedy