Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
50UM6900PUA
www.lg.com
*MFL71101913*
Printed in Korea
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
(1911-REV02)
Advertisement
Table of Contents
Related Manuals for LG 50UM6900PUA
Summary of Contents for LG 50UM6900PUA
- Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 50UM6900PUA www.lg.com *MFL71101913* Printed in Korea Copyright © 2019 LG Electronics Inc. All Rights Reserved.
-
Page 2: Important Safety Instruction
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/ arbitration (Canada). - Page 3 Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in. CAUTION • Take care not to touch the ventilation openings. When watching RISK OF ELECTRIC SHOCK the TV for a long period, the ventilation openings may become hot. DO NOT OPEN • Protect the power cord from physical or mechanical abuse, such as CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT being twisted, kinked, pinched, closed in a door, or walked upon. REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. Pay particular attention to plugs, wall outlets, and the point where REFER TO QUALIFIED SERVICE PERSONNEL. the cord exits the device. The symbol is intended to alert the user to the presence of • Do not move the TV whilst the Power cord is plugged in. uninsulated dangerous voltage within the product’s • Do not use a damaged or loosely fitting power cord. enclosure that may be of sufficient magnitude to constitute a risk ...
- Page 4 - If you smell smoke or other odors coming from the TV. • Cleaning - When lightning storms or when unused for long periods of time. - When cleaning, unplug the power cord and wipe gently with a Even the TV is turned off by remote control or button, AC power soft/dry cloth. Do not spray water or other liquids directly on the source is connected to the unit if not unplugged in. TV. Do not clean your TV with chemicals including glass cleaner, • Do not use high voltage electrical equipment near the TV (e.g., a any type of air freshener, insecticide, lubricants, wax (car, bug zapper). This may result in product malfunction. industrial), abrasive, thinner, benzene, alcohol etc., which can • Do not attempt to modify this product in any way without written damage the product and/or its panel. Otherwise, this may result authorization from LG Electronics. Accidental fire or electric shock in electric shock or product damage. can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product. • Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock. • Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter. • To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with ...
-
Page 5: Optional Extras
Preparing Optional Extras • When the TV is turned on for the first time after being shipped Optional extras can be changed or modified for quality improvement from the factory, initialization of the TV may take approximately without any notification. Contact your dealer for buying these items. one minute. These devices work only with certain models. • Image shown may differ from your TV. The model name or design may be changed due to the manufacturer’s • Your TV’s OSD (On Screen Display) may differ slightly from that circumstances or policies. shown in this manual. • The available menus and options may differ from the input source Wall Mounting Bracket or product model that you are using. • New features may be added to this TV in the future. (Depending upon model) • The device must be easily accessed to a location outlet near the Make sure to use screws and wall mount bracket that meet the VESA access. Some devices are not made by turning on / off button, standard. Standard dimensions for the wall mount kits are described in turning off the device and unplugging the power cord. the following table. • The items supplied with your product may vary depending upon the model. • Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. • For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 ... -
Page 6: Lifting And Moving The Tv
Lifting and moving the TV Mounting on the Table When moving or lifting the TV, read the following to prevent the TV 1 Lift and tilt the TV into its upright position on a table. from being scratched or damaged and for safe transportation regardless • Leave a minimum of 10 cm (4 inches) space from the wall for of its type and size. proper ventilation. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and 10 cm (4 inches) all cables. • When holding the TV, the screen should face away from you to avoid damage. (Depending upon model) 2 Connect the power cord to a wall outlet. • Hold the top and bottom of the TV frame firmly. Make sure not to • Do not apply foreign substances (oils, lubricants, etc.) to hold the transparent part, speaker, or speaker grille area. the screw parts when assembling the product. (Doing so may damage the product.) • If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. -
Page 7: Mounting To The Wall
Mounting to the Wall Securing TV to the Wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. (Depending upon model) We recommend that you use an LG brand wall mount. The LG wall 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back mount is easy to adjust or to connect the cables. When you do not use of the TV. LG’s wall mount bracket, use a wall mount bracket where the device is • If there are bolts inserted at the eye-bolts position, remove the adequately secured to the wall with enough space to allow connectivity bolts first. to external devices. If you are using a non-adjustable mount, attach the 2 Mount the wall brackets with the bolts to the wall. mount to the wall. Attach the cables to the TV first, then attach the TV Match the location of the wall bracket and the eye-bolts on the rear to the mount. of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. 10 cm (4 inches) • Use a platform or cabinet that is strong and large enough to ... - Page 8 Other connections • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of Connect your TV to external devices. For the best picture and audio dust and insects, (Depending upon model). quality, connect the external device and the TV with the HDMI cable. HDMI • When connecting the HDMI cable, the product and external devices should be turned off and unplugged. • HDMI Audio Supported Format: (Depending upon model) Stand hole DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) (Only UHD models) • → ( ) → [Picture] → [Additional Settings] → [HDMI ULTRA HD Deep Color] - On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) - Off: Support 4K @ 60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s Connections [HDMI ULTRA HD Deep Color] setting to off. - This feature is available only on certain models which support HDMI ULTRA HD Deep Color.
-
Page 9: Using Button
• Some USB Hubs may not work. If a USB device connected through TV is on. a USB Hub is not detected, connect it directly to the USB port on 3 You can use the function when you access menu control. the TV. • When connecting via a wired LAN, it is recommended to use a CAT Adjusting the menu 7 cable. • The TV may be capable of operating without a set-top-box from a When the TV is turned on, press the button one time. You can adjust multichannel video programming distributor (MVPD). the Menu items using the button. Turns the power off. Remote RS-232C setup Changes the input source. Adjusts the volume level. Scrolls through the saved channels. To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual, (Depending upon model). • Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. • When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. -
Page 10: Using Remote Control
Using Remote Control ** To use the button, press and hold for more than 1 second. (POWER) Turns the TV on or off. (Depending upon model) Returns to the last TV channel. The descriptions in this manual are based on the buttons on the remote (SEARCH) Shows the search mode. control. Please read this manual carefully and use the TV correctly. Activates or deactivates the subtitles. (Q. Settings) Accesses the Quick Settings. To install batteries, open the battery cover, replace batteries (1.5 V AAA) (INPUT) Changes the input source. matching the and ends to the label inside the compartment, Number button Enters numbers. and close the battery cover. To remove the batteries, perform the Accesses the [QUICK HELP]. installation actions in reverse. This remote uses infrared light. When in (DASH) Inserts a between numbers such as 2-1 and 2-2. use, it should be pointed in the direction of the TV’s remote sensor. Accesses the saved channels list. (MORE ACTIONS) Displays more remote control functions. ... -
Page 11: Troubleshooting
• Do not mix new batteries with old batteries. This may Abnormal Display cause the batteries to overheat and leak. • If the TV feels cold to the touch, there may be a small flicker when • Failure to match the correct polarities of the battery it is turned on. This is normal; there is nothing wrong with TV. may cause the battery to burst or leak, resulting in fire, Some minute dot defects may be visible on the screen, appearing personal injury, or ambient pollution. as tiny red, green, or blue spots. However, they have no adverse • This apparatus uses batteries. In your community there effect on the TV’s performance. Avoid touching the LCD screen or might be regulations that require you to dispose of these holding your finger(s) against it for long periods of time. Doing so batteries properly due to environmental considerations. may produce some temporary distortion effects on the screen. Please contact your local authorities for disposal or • This panel is an advanced product that contains millions of pixels. recycling information. In a very few cases, you could see fine dots on the screen while • Batteries inside or inside the product shall not be exposed you’re viewing the TV. Those dots are deactivated pixels and do not to excessive heat such as sunshine, fire or the like. affect the performance and reliability of the TV. • Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen User Guide for a extended length of time. Generated Sound For more information about this TV, read the USER GUIDE embedded in the product. -
Page 12: Specifications
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). (Depending upon country) Broadcasting Specifications Television system ATSC / NTSC-M, 64 & 256 QAM Program coverage VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135 (Band) External antenna 75 Ω impedance Wireless module (LGSWFAC81) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 20 dBm 5150 to 5725 MHz 15 dBm 5725 to 5850 MHz 14.5 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body. FCC ID: BEJLGSWFAC81 IC: 2703H-LGSWFAC81 Environment condition Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Operating Humidity... - Page 13 Open Source Software Regulatory Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. Licenses - - - - ...
- Page 14 (1) (2) (3) (4) NOTE TO CABLE/TV INSTALLER (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. ...
- Page 15 WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • Only using furniture that can safely support the television set. • Ensuring the television set is not overhanging the edge of the supporting furniture. • Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. • Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. • Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied. Symbols Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refers to “ ON” (power). Refers to dangerous voltage. ...
- Page 18 Supplier`s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. LG Customer Information Center Address 1000 Sylvan Ave Englewood Cliffs, NJ 07632 For inquires or comments, visit www.lg.com or call; Telephone (201)266-2215 1-888-542-2623 CANADA 1-800-243-0000 USA, Consumer User...