Download Print this page
Pyle SereneLife UDI R/C SLRBT10 Operation Manual

Pyle SereneLife UDI R/C SLRBT10 Operation Manual

Advertisement

Quick Links

by
SLRBT10
Operation Manual for 2.4 G Wireless RC Boat
1. The product adopts 370 magnetic motor driving system as well as advanced 2.4 G
frequency pairing automatically technology for longer controlling distance.
2. Be equipped with Li Battery. The highest speed is about 25km/h.
3. Boat Speci cation: 342*89*88mm
4. Special anti- capsize function: turn over when capsize for normal sailing.
5. Motor cooling system: extend use life of the boat.
6. Build-in left and right navigation rudder: enhance sailing stability.
7. Low battery alarm function: the transmitter issues sound of "dididi..." low battery
alarm. Please recall the boat in on minute.
8. Poor Signal alarm function: the transmitter will issue alarm sound of di.di.di.di.di -
di.di.di.di.di once the 2.4G signal becomes poor.
Security Warning
For the safety and avoid hitting people which around propeller, the boat can's work
properly till put into the water. Never touch the rotating propeller.
1. The product is suitable for more than 14 years old people. Please use it under
adult's supervision and guidance.
2. Never mixed use old and new battery or di erent types of batteries. Never charge
a non-rechargeable battery.
3. Never charge the battery at once after using till cooling down.
4. Make sure that there is no one swimming around to avoid injury before sailing.
Keep away form water plant and debris to avoid the propeller tied up in the water
and cause damage.
5. The e ective control distance is about 120m. Never exceed the range or the boat
may be out of control.
6. The transmitter will issue sound of "dididi" when low battery in the sailing. At this
time the boat will slow down and the battery only can maintain one minute. Please
recall the boat in one minute to avoid out of control.
7. When the boat sailing far away from the transmitter, the transmitter will issue alarm
sound of di.di.di.di.di -di.di.di.di.di Long distance between the boat and the
transmitter will arouse poor signal, which will e ect the timeliness and accuracy of
the transmitter's low voltage alarm function. At this time, please control the boat
sailing close to the transmitter (the transmitter power indicator light turns solid) to
ensure the low voltage alarm function works well.
8. Please power o the transmitter and the boat when the boat not in use.
9. Please attach great importance on safety rst when sailing. If the boat out of control,
retrieve the boat by safe and reliable method. Never retrieve the boat without any
safe measure.
Maintenance and Repair
1. Take out the battery when the boat stops working.
2. The RC boat surface should avoid long time exposure in case of paint-shedding.
Each time after use, clean the boat surface by dry and soft cloth to absorb water.
Keep the boat clean and dry.
3. If the RC boat is not used for a long time, remove the battery to avoid leakage
damaging form battery to the transmitter.
2

Advertisement

loading

Summary of Contents for Pyle SereneLife UDI R/C SLRBT10

  • Page 1 Operation Manual for 2.4 G Wireless RC Boat 1. The product adopts 370 magnetic motor driving system as well as advanced 2.4 G frequency pairing automatically technology for longer controlling distance. 2. Be equipped with Li Battery. The highest speed is about 25km/h. 3.
  • Page 2 Picture for RC Boat Main Structure Transmitter Battery Installation Battery installation: Open the battery cover of the transmitter. Install four 1.5V AA Cabin Cover Switch batteries to battery box in accordance with the positive and Cabin Cover negative pole indication, and then close the battery box. Steering Engine Rod Battery Cover...
  • Page 3 RC Boat Battery Installation Code Pairing Between Transmitter and RC Boat Power on the transmitter, and the power indicator light of the transmitter ashes and issues sound of “di”. Put the boat into water and the transmitter issues constantly sound of “dididi”. The power indicator light of the transmitter keeps bright, which indicates successful code pairing and the boat is ready to be operated.
  • Page 4 Spare Parts RC Boat Capsize After First SLRBT10-01 SLRBT10-02 SLRBT10-03 SLRBT10-04 5. If the boat capsizes in the water, push forward the throttle trigger of the transmitter and Steering Engine Propeller Tail Rudder Screw Rod then pull back at once and the boat will return to normal. Left Trim Left Rudder Trim SLRBT10-05...