Safety Instructions; Icon Explanation; Safety Statements; General Instructions - Emerson Copeland Stream Digital 4MFD-13X Application Manuallines

1

Safety instructions

Copeland™ brand products semi-hermetic compressors are manufactured according to the
latest European safety standards. Particular emphasis has been placed on the user's safety.
These compressors are intended for installation in systems according to the Machinery Directive
MD 2006/42/EC. They may be put to service only if they have been installed in these systems
according to instructions and conform to the corresponding provisions of legislation. For relevant
standards please refer to the Manufacturer's Declaration, available on request.
These instructions should be retained throughout the lifetime of the compressor.
You are strongly advised to follow these safety instructions.
1.1

Icon explanation

WARNING
This icon indicates instructions to
avoid personal injury and material
damage.
High voltage
This icon indicates operations with a
danger of electric shock.
Danger of burning or frostbite
This icon indicates operations with a
danger of burning or frostbite.
Explosion hazard
This icon indicates operations with a
danger of explosion.
1.2

Safety statements

 Refrigerant compressors must be employed only for their intended use.
 Only qualified and authorized HVAC or refrigeration personnel are permitted to install
commission and maintain this equipment.
 Electrical connections must be made by qualified electrical personnel.
 All valid standards for connecting electrical and refrigeration equipment must be
observed.
 The national legislation and regulations regarding personnel protection must be
observed.
1.3

General instructions

WARNING
System breakdown! Personal injuries! Never install a system in the field
and leave it unattended when it has no charge, a holding charge, or with the
service valves closed without electrically locking out the system.
System breakdown! Personal injuries! Only approved refrigerants and
refrigeration oils must be used.
WARNING
High shell temperature! Burning! Do not touch the compressor until it has
cooled down. Ensure that other materials in the area of the compressor do
not get in touch with it. Lock and mark accessible sections.
CAUTION
Overheating! Bearing damage! Do not operate compressors without
refrigerant charge or without being connected to the system.
C6.3.2/0416-0716/E
CAUTION
This icon indicates instructions to
avoid property damage and possible
personal injury.
IMPORTANT
This icon indicates instructions to
avoid malfunction of the compressor.
This
NOTE
recommendation for easier operation.
Use personal safety equipment.
protective clothing, safety boots and hard hats should be worn
where necessary.
word indicates
Safety goggles, gloves,
a
1