LG WF-T1407TP Owner's Manual page 14

14
F
unction of each Button
WATER TEMPERATURE
BUTTON (OPTION)
• Use to select Water
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT COLD
respectively.
Default setting is COLD.
AIR DRY
• This button is used for air-drying of your
laundry.
• Air dry selections light up in sequence as
follows.
TUB DRY 60
TUB DRY as the button is pushed.
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum. (Except Model: WF-T1407TP)
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds rinsing, and the remain-
ing time may be increased. (Except Model: WF-T1407TP)
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the washing habit of a spe-
cific user. So, it does not matter that the user uses it according to her/his washing habit. (Except Model: WF-T1407TP)
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased. (Except Model: WF-T1407TP)
WATER LEVEL BUTTON
• Use to select the proper amount of water in relation
to the weight and type of laundry.
• Automatically controlled, but can be selected
manually by pressing the WATER LEVEL Botton.
• WATER LEVEL is automatically selected for
FUZZY(normal) program.
The following settings are indicated as the button is
pushed
7 8 • 9 10 1
TUB DRY
CHILD LOCK FUNCTION
• Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
90 120 SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.
(refer to page 25)
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs, an error
message appears to indicate the abnormality. For
2 • 3 4 5 • 6 7 example,
indicated.
indicates that the lid is open.
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed .
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
• When the button is pressed
during washing, the remaining
time is displayed.