Biostar M7NCD Pro User Manual
Biostar M7NCD Pro User Manual

Biostar M7NCD Pro User Manual

Biostar m7ncd pro motherboard: user guide
Hide thumbs Also See for M7NCD Pro:
Table of Contents

Advertisement

Available languages

Available languages

M
7
N
C
D
P
r
o
M
7
N
C
D
P
r
o
M
7
N
C
D
P
r
o
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here of and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here of without obligation to notify any party
beforehand.
Duplication of this publication, in part or in whole is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we will not
be responsible for any mistakes found in this user's manual. All the brand and
product names are trademarks of their respective companies.
i

Advertisement

Table of Contents
loading

Summary of Contents for Biostar M7NCD Pro

  • Page 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    ENGLISH... 1 M7NCD Pro Features... 1 Package contents ... 2 Layout of M7NCD Pro... 3 CPU Installation ... 4 DDR DIMM Modules: DIMMB1/ DIMMB2/ DIMMA1 ... 5 Jumpers, Headers, Connectors & Slots ... 6 DEUTSCH ... 12 M7NCD Pro Merkmale ... 12 Verpackungsinhalt...
  • Page 3: English

    English M7NCD Pro Features ® Supports the AMD Socket 462 processor up to XP 3000+. Running at 200/266/333/400 MHz Front Side Bus. Chipset North Bridge: nForce2 SPP. South Bridge: MCP. High Speed 800Mb/s Hyper-Transport interface to the MCP. Main Memory Supports up to 3 DDR devices.
  • Page 4: Package Contents

    Supports USB Function. Operating System Offers the highest performance for MS-DOS, Windows 98SE, Windows 2000, Windows Me, Windows XP, SCO UNIX etc. Dimensions ATX Form Factor: 24.4cm X 30.5cm (W X L) Package contents HDD Cable X 1 FDD Cable X 1 Fully Setup Driver CD X 1 User’s Manual X 1 USB Cable X 2 (Optional)
  • Page 5: Layout Of M7Ncd Pro

    Layout of M7NCD Pro...
  • Page 6: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU. Press the lever down.
  • Page 7: Ddr Dimm Modules: Dimmb1/ Dimmb2/ Dimma1

    DDR DIMM Modules: DIMMB1/ DIMMB2/ DIMMA1 For Dual-channel DDR (128-bit) high performance, at least 2 or more DIMM modules must be installed. (It has to be the combination of DIMMA and DIMMB.) With only one DIMM installed, the memory performs only at 64-bit. DRAM Access Time: 2.5V Unbuffered DDR 200/266/333/400 MHz Type required.
  • Page 8: Jumpers, Headers, Connectors & Slots

    Peripheral Component Interconnect Slots: PCI1-5 This motherboard is equipped with 5 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards, which has, supplanted the older ISA bus standard in most ports. This PCI slot is designated as 32 bits.
  • Page 9 Wake On LAN Header: JWOL1 JWOL1 Front USB Header: JUSB1/ JUSB2 Pin Assignment Pin Assignment JUSB1/2 5V/ 5V_SB Selection for KB: JKBV1 JKBV1 Pin 1-2 on Pin 2-3 on Wake up Ground 5V_SB Data (-) Data (-) Data (+) Data (+) Ground Ground Assignment...
  • Page 10 5V/ 5V_SB Selection for USB: JUSBV1/JUSBV2/JUSBV4 JUSBV1/ 2/ 4 Pin 1-2 on Pin 2-3 on Front Panel Connector: JPANEL1 PWR_LED (+) (-) HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==> Reset Button PWR_LED ==> Power LED ON/ OFF Audio Subsystem: JF_AUDIO1/ JCDIN1 (Front Audio Header) (CD-ROM Audio-In Header)
  • Page 11 Assignment Mic In Mic Power RT Line Out Reserved LFT Line Out *JF_AUDIO1 only support 2CH. Front Panel Audio Connector/ Jumper Block Jumper Setting Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector. No jumpers Audio line out and mic in signals are installed...
  • Page 12 Remove AC JCMOS power line Pin2-3 close AC power Reset the password as you wish Case Open Connector: JC1 Back Panel Connectors JKBMS1 JUSBLAN1 JPRNT1 PS/2 LAN(Optional) Mouse PS/2 COM1 Keyboard JCOM1 wait 15 JCMOS seconds Pin1-2 close or clear CMOS data Case Open Signal Ground...
  • Page 13 LED indicator for Lan port status: Status Normal Speed Right light: green 10Mbps Left light: no Right light: green 100Mbps Left light: orange Download Light: blink Light: blink...
  • Page 14: Deutsch

    Deutsch M7NCD Pro Merkmale Unterstützung für AMD Prozessor(Sockel 462) bis zu XP 3000+. FSB 200/266/333/400MHz.. Chipsatz Northbridge: nForce2 SPP. Southbridge: MCP. 800Mb/s Hohe Geschwindigkeit : Hyper-Transport -Interface zu den MCP Chipsatz. Hauptspeicher Unterstützung für 3 DDR Geräte. Unterstützung für 200/266/333/400MHz(ohne ECC) DDR Geräte.
  • Page 15: Verpackungsinhalt

    Unterstützung für AWARD legal Bios. Unterstützung für APM1.2. Unterstützung für ACPI. Unterstützung für USB Function. Betriebsystem Unterstützung für die am meisten verbreiteten Betriebsysteme wie Windows 98SE, Windows 2000, Windows ME, Windows XP und SCO UNIX usw. Abmessungen ATX Form-Factor: 24.4cm X 30.5cm (W X L) Verpackungsinhalt HDD Kable X 1 FDD Kable X 1...
  • Page 16: Layout Von M7Ncd Pro

    Layout von M7NCD Pro...
  • Page 17: Installation Der Cpu

    Installation der CPU Ziehen Sie den Hebel seitwärts von der Sockel und neigen Sie ihn um 90-Grad nach oben. Suchen Sie Pin A im Sockel und den weißen Punkt oder die Abschnittkante in der CPU. Passen Sie Pin A mit dem weißen Punkt/der Abschnittkante zusammen und legen Sie danach die CPU ein.
  • Page 18: Ddr-Dimm-Modules: Dimmb1/Dimmb2/ Dimma1

    DDR-DIMM-Modules: DIMMB1/DIMMB2/ DIMMA1 Für Dual-Kanal DDR(128-bit) mindenstens zwei oder mehr DIMM-Modules installieren. (Der Speicher mußt in der Kombination von DIMMA und DIMMB installiert werden.) Wenn man nur ein Dimm installiert, funktioniert die Speicher nur 64-bit. DRAM Zugriffszeit: 2.5V unbuffered DDR 200/266/333/400 MHz Typen erfordert. DRAM Typen: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM-Module (184 pin) DIMM-Sockel DDR-Module...
  • Page 19: Jumper, Header, Anschlüsse & Slots

    Bandkabel des Diskettenlaufwerks. Peripheral Component Interconnect Slots: PCI1-5 Dieses Motherboard ist mit 5 standardmäßigen PCI-Slots ausgestattet. PCI steht für Peripheral Component Interconnect und bezieht sich auf einem Busstandard für Erweiterungskarten, der den älteren ISA-Busstandard in den meisten Schnittstellen ersetzt hat.
  • Page 20 Wake On LAN Header: JWOL1 JWOL1 Front USB Header: JUSB1/ JUSB2 Pin Beschreibung Pin Data (-) Data (+) JUSB1/2 Masse Schl ssel Auswahl von 5V/ 5VSB für KB: JKBV1 JKBV1 Pin 1-2 geschlossen Pin 2-3 geshclossen Auswahl von 5V/ 5VSB für USB: JUSBV1/JUSBV2/JUSBV4 JUSBV1/ 2/ 4 Pin 1-2 geschlossen Pin 2-3 geschlossen...
  • Page 21 Anschlüsse auf der Vorderseite: JPANEL1 PWR_LED (+) (-) HLED ==> Lautsprecheranschl. HLED ==> Festplattenanzeige ==> Reset-Taste ==> Infrarotanschl. ==> Sleep-Taste PWR_LED ==> Stromanzeige EIN/ AUS ==> Ein-/ Ausschalttaste Audio Subsystem: JF_AUDIO1/ JCDIN1 JAUDIO1 (Cabezal de Audio Frontal) (Cabezal de Entrada de Audio CD-ROM) Beschreibung Mic-In Mic Power...
  • Page 22 Audio-Anschl ü sse für die Vorderseite/ Jumper-Block Jumper-Einstellen Pin 5 und 6 Pin 9 und 10 Kein Jumper installiert Clear CMOS Jumper: JCMOS JCMOS1 Pin 1-2 geschlossen Pin 2-3 geschlossen AC Stromstecker Pin2-3 geschlossen ausziehen JCMOS AC power Pin1-2 geschlissen Konfiguration Audio-Out-Singals werden zu der Audio-Out-Anschluss an...
  • Page 23 Case Open Connector: JC1 Anschlüsse auf der Rückseite JUSBLAN1 JKBMS1 LAN(optional) PS/2- Maus PS/2- COM1 COM1 Tastatur JCOM1 öffnen Geh äuse Signal Masse Ground JPRNT1 JGAME1_USB1 Parallel Game-Port Line-In COM2 JCOM2 Mic- In...
  • Page 24: Watchdog Technology

    Watchdog Technology It is important to know that when overclocking, the system can be at a vulnerable state. Therefore, the BIOSTAR Watchdog Technology was designed to protect your PC under dangerous over-clock situations. Any over-clocking that reaches the threshold settings, the Watchdog Technology will disable your system from rebooting in the BIOS setting.
  • Page 25: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning. PROBABLE System does not boot from hard disk drive, can be booted from CD-ROM drive.
  • Page 26: Problemlösung

    Problemlösung MÖGLICHE URSACHE Das System hat keine Spannungsversorgung. Die Stromanzeige leuchtet nicht, der Lüfter im Inneren der Stromversorgung wird nicht eingeschaltet. Tastaturleuchten sind nicht an. MÖGLICHE URSACHE System funktioniert nicht. Tastaturleuchten sind Stromanzeige leuchtet, die Festplatte dreht sich. MÖGLICHE URSACHE Das System wird von der Festplatte nicht hochgefahren, vom CD-ROM-Treiber aber ja.
  • Page 27 04/8/2003...

Table of Contents