How To Assemble Your Monitor Hardware - BenQ FP94VW User Manual

3. How to assemble your monitor hardware

If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a
stapler or a mouse will crack the glass or damage
the LCD substrate voiding your warranty. Sliding or
scraping the monitor around on your desk will
scratch or damage the monitor surround and
controls.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean pad-
ded surface.
While holding the monitor firmly against the desk,
pull the monitor stand arm upwards clear of the
monitor.
Orient and align the stand base socket with the end
of the stand arm, then push them together until they
click and lock into place.
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You should position the monitor and angle the
screen to minimize unwanted reflections from other
light sources. While adjsting the angle, hold the
base so that the monitor does not topple.
8 How to assemble your monitor hardware