BenQ FP747 User Manual page 35

C. Refresh Rate Selection
There is no need to choose the highest possible refresh rate on a LC display. It is not technically
possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely flicker-
free image. More important is that you make sure that you use one of the factory modes. In con-
trast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-frequency
monitor. This means, the best results are only obtained by using the factory modes. You will find a
table with the factory modes in this user's guide. For the native resolution of 1280x1024, these, for
example, are 60, 70 and 75 Hertz, not 72 Hz; however, in Windows 95/ 98/ 2000/ XP you can
change the refresh rate as follows:
1. Double click the "Display" icon in the Control Panel.
2. From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..."
button in the bottom right corner.
BenQ LCD Color Monitor User's Guide
English 34