2. Connection to the network
Item
BROADCAST
ENCRYPTION
WIRELESS
SETUP
(continued)
(continued on next page)
28
Configures SSID BROADCAST.
SSID
Set this function to OFF when making SSID
of a projector not to be displayed in wireless
connection list of the computer.
Select the encryption method to be used.
WEP 64bitWEP 128bitWPA-PSK(TKIP)
WEP 64bit and WEP 128bit are available only
in INFRASTRUCTURE mode.
It is required to enter the encryption key when
selecting the encryption method other than
OFF and pressing the ► button.
NOTE
• WPA2-PSK (AES) is recommended for encryption
method of IEEE802.11n. Transmission speed in
IEEE802.11n may be slow when other encryption
method (WEP, WPA-PSK (TKIP), WPA2-PSK
(TKIP)). Change the setting to "AES" if encryption
other than "AES" is set.
• Encryption method not included in the selected
item cannot be available.
Select the channel of the wireless LAN to be
used while MODE (&25) is set to SIMPLE
ACCESS POINT.
The channels 1 to 11 are available. To save the
CHANNEL
setting, press the ► button.
• The available channels vary depending on a
country.
Description
WPA2-PSK(AES) WPA2-PSK(TKIP)
OFF
WPA-PSK(AES)