Table of Contents
Advertisement
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
I am having difficulty setting up Wired equivalent
Privacy (WeP) security on my Router .
1 . Log in to your Router. Visit
Click on the "Login" button in the top right-hand corner of the
screen. You will be asked to enter your password. If you have never
set a password, leave the "Password" field blank and click "Submit".
2 . Click "Wireless" in the left-hand menu. Then
click "Security" just below that.
3 . Select the "128-bit WEP" option.
4 . You may type in a WEP key manually, or generate one from
a passphrase. Type a phrase in the "Passphrase" field and
click the "Generate" button. A WEP key is composed of 26
hexadecimal digits (0–9, A–F .. For example, C3 03 0F AF
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.
http://router/
with your web browser.
5 . Click "Apply Changes" to finish. Your wireless
activity is now encrypted. Each computer using your
wireless network will need to use the new key.
note: If you are configuring the Router over a wireless
connection, you will have to re-connect to the
Router after changing any security settings.
note: Some older networking hardware supports
only 64-bit WEP encryption. If your older computers
cannot connect to your network, try 64-bit WEP.
33
Advertisement
Table of Contents
